Police License No 36452
Australian Standard AS/NZS 3016-2002
PO Box 483, Kelmscott
Western Australia 6111
Call Jason on 0419 900 580
AS A POWERFUL PHYSICAL BARRIER
Any attempt to breach the Elec-Protect security fence will result in a painful but safe 'shock' or series of shocks, delivered by the high voltage impulses.
AS A PERIMETER SENSOR (With no need to introduce any other form of perimeter security)
Installed so that the fence and gate/s form a monitored circuit (or circuits), the Elec-Protect security fence may be integrated with any capable surveillance system to generate an alarm if the fence is cut or short-circuited by an intruder.
AS A VISUAL DETERRENT
The Elec-Protect security fence, complete with mandatory warning notices, presents a daunting visual barrier.
NO FALSE ALARMS
Alarms will not be 'false' but rather, will alert you to a condition which may have been caused by one of the following factors:
FOR USE WITH LINK MESH FENCE
The Elec-Protect security fence consists of high tensile galvanized wires attached by insulators to galvanized steel uprights that are then mounted on the interior face of the existing fence and gate/s. The conductors are energized with low amperage electrical impulses of up to 10,000 volts(10kV). Mandatory warning notices are posted at frequent intervals.
FOR USE WITH MASONARY, WROUGHT IRON, ETC
Where illegal entry is gained by climbing over fences that might otherwise be regarded as impenetrable, a modified version of the Elec-Protect fence will be fixed on top of the existing structure.
WITH AN ALARM SYSTEM
Elec-Protect recommends integrating the fence with a surveillance system so that any damage – whether deliberate or accidental – will cause an alarm. For large compounds, the fence may be divided into a number of separately monitored sectors to aid location of alarm origin. Where circumstances dictate, a capacity to activate and de-activate sectors independently may be provided.
GATES
The electrical circuit is completed when the gates are closed, bringing together ‘gate contacts’ which carry the current. If a gate is opened while the system is armed, the contacts are separated and an alarm will occur.
SAFE OPERATION
The Elec-Protect fence can be controlled by Proximity Readers, an Access Code Pad placed in a locked enclosure at the main entry gate (or by a variety of ‘remote’ methods). The system can then be armed and disarmed before entry/egress so there is no need to open or close gates while they are alive.